Continuous Wave (CW) Laser vs a Pulsed Laser

Purchasing laser safety protection is impacted by if the laser is continuous or pulsed.  Below, we illustrate that although the average power of a laser may be the same, a pulsed laser has peaks that require more protection (as it becomes necessary to protect from the peaks).  

Continuous Wave Lasers are defined as having a pulsed length > 0.25s.  The calculation is relatively simple, and all that is needed is the average power of the laser.

Repetitive Pulse Lasers have higher peak energies and therefore are more complicated to calculate a Maximum Permissible Exposure (MPE). To determine the MPE with a repetitive pulse laser, you must have the following:

• Wavelength (measured in nm, µm)
• Pulse repetition frequency (F – measured in Hertz or Hz)
• Duration of a single pulse or pulse width (time – measured in seconds or s)
• Energy per Pulse (J)

_{Find below the four types of lasers (defined by pulse frequency) mentioned in EN guidance.}